home->productions->single chips->Serial to
Wireless
NeChips: Serial to
Wireless family
Nechip
Summary
﹛
uBGA 144 balls
SOP 48pins
High Lights
Minimal engineering effort required to web-enable virtually
any electronic device
High performance, High reliability Single chip with ARM-based 32bit Core
embedded
Offer up to 5 high speed UARTS,10/100M ethernet(MAC
+ PHY)
Real-time edge device status via e-mail alerts
Abundant network protocols, support GPRS,WLAN,WCDMA Modules
EMC/EMI-compliant; RoHS-compliant
Everything you need 〞 all in a single Chip
It*s not only a single chip, but the whole system that*s ready for product.
.
NeChip: Serial to wireless provides
exceptionally cost-effective, full-featured TCP/IP Internet
connectivity for 3.3-volt devices. Designed to meet the needs
of high-bandwidth applications, it provides an ideal solution
for Internet-enabling devices via 802.11X Wlan and 10/100M
ethernet.And the advanced models can support mutli-channel based on
gprs+eth+wlan
Key Features
• Core: ARM 32-bit ARM7TDMI
每 70 MHz maximum frequency,
0.9DMIPS/MHz (Dhrystone 2.1)
performance at 0 wait state memory
access
每 Single-cycle multiplication and hardware
division
• Memories
每 With 256k/512k bytes of flash integrated
on chip, 32k bytes of boot room
每 Up to 256k bytes of SRAM
每 External memory interface
With 16bits data and 24bits addressing
Support external SRAM/PSRAM/Nor Memories
• Serial ports
每 Support up to 5 high speed UARTS with DMA
每 Hardware Flow control supported
每 Software Flow control supported
• Ethernet Interface
每 Integrate 10/100M MAC + PHY with DMA
每 Support auto sensing or user mode under
100M Full/Half Duplex
10M Full/Half Duplex
每 Hardware TCP/IP accelerator
• SDIO/SPI
每 Support external embedded WLAN modules
with SDIO/SPI interface
每 Support expanding SD/MMC card
每 Support File system
• Low power consumption
每 Sleep, Stop and Standby modes
每 Regular / high speed mode switch
• Clock, Power supply
每 Single external 25M oscillator required
Internal PLL to 60/70MHZ
每 Single power supply:
3.2 - 3.45V
MARK: Some models may require another 1.8V
Power supply for core.
System parameters:
• The only complete single chip with Ethernet and network system embedded
• Mutli-T RTOS embedded
• RS-232/485/422 support
• Embedded web server
• 10/100Mbit Ethernet 每 Auto-Sensing
• Field proven TCP/IP protocol suite and web¬ based application framework
• Easy configuration through a web interface
• Easy customization of HTML web pages and configuration screens
• Interactive web pages through the use of Java applets
• E-mail alerts
• FTP server / client for file transmission
• SD/MMC card as local/remote file storage
• SSL/TLS support 128-, 192-, 256-bit AES or Tri - DES encryption
(Optional)
• File system supported
FAT12/26/32
• Extended operating temperature:
-40 to +85û C Industrial Model
0 to +75û C Commercial Model
• High-performance processor
(55MIPS on 32bits RISC)
• Network overhead handled by NeChip
• Password protection
• Upgrade NeChip*s bootloader and firmware over the network and Serial port
• 3.3V power
• Serial-to-10/100 Ethernet/wlan/gprs/WCDMA
Offer 1-5 uarts, baud rate up to 921600bps
For secure applications, The Ne3232LS will be
the best choice, which
supports SSL3/TLS1.0 for secure sockets. For more
information about Nechip,please contact us.
﹛
Internet Protocols: ﹞ Ethernet: Version 2.0/IEEE 802.3
ARP, UDP/IP, TCP/IP, PING/ICMP, DHCP, BOOTP,
Auto IP,TFTP, SNTP ,TELNET ,HTTPㄛDNS,SMTP, PPP,
LCP, PAP,
CHAP, IPCP, PPPoE,SSL/TLS,HTTPS ,SNMP(Optional).
FTP Server/Client (Optional) ﹞ Includes Web
server (up to 8Mb) Web site,user can update the web via serial
or ethernet ﹞ Includes device management tunnel
﹛
PC Ready Software: ﹞ Virtual Com driver/tool
﹞ Device Manager
Click here for NEVB-CXT32SI1XL
photo Click here for NEVB-CXT32SI1XW
photo Overview NE-EVB3216L is
the evaluation board for NeChip Ne3216L for wired LAN applications. The PCB includes
the 3.3v Ne3216/Ne3232 as the core processor for serial-IP
application.The EVB integrate a DB9 connector as RS232/RS485
communication interface. Additionally,there is a daughter
board which provide the ethernet interface for serial-IP
applicaiton.it can support almost all of the current ethernet
adaptor.
NE-EVB3232L is the evaluation board for
Nechip Ne3232L which is used for advanced application.To
reduce the total cost of user application, Ne3232L has
integrated a smart MAC on chip, so a cheap PHY is required for
ethernet communication.It also includes a daughter board which
provide the phy for net connection.
Detailed data about Ne3216L and Ne3232L can
be gotten from our FAE.