Worldwide [ Select  Language  ]
¡¡

Contact Us    Legal     Links   

  Home                         
ProductsApplicationsSupportNewsAbout ConextopWhere to buy
productions & modules
Single Chips
¡¡ Embedded solutions
-- Neport Series
   -NePort-R 
   -NePort
   -NePort-EN 
-- Board Modules
¡¡ Extern Device Servers
software & tools
--Evaluation boards
--Software

¡¡

  

home->productions->Embedded solutions->neport series->neport

Embedded Device Servers

NePort-EN:Enhanced Embedded Ethernet Device Server

High Lights

  • Minimal engineering effort required to web-enable virtually any electronic device
  • Remote command and control of edge devices
  • Real-time edge device status via e-mail alerts
  • 256-bit AES encryption for secure communications
  • EMC/EMI-compliant; RoHS-compliant
  • Everything you need ¡ª all in a single RJ45 package
  • Offer up to 3 serial ports
¡¡
Overview Ordering Information Demo Boards

Build Serial to Ethernet Connectivity and Control into Your Products, Quickly and Simply

Neport® is a compact, integrated solution to web enable virtually any device with serial capability. By incorporating Neport to a product design, manufacturers can quickly and easily offer serial to Ethernet networking capability as a standard feature ¡ª so they can be accessed and controlled over the Internet.

Full Networking in a Tiny Package

Neport embedded device server removes the complexity ¨C of designing network connectivity into a product by incorporating all of the required hardware and software inside a single embedded Ethernet solution. Smaller than your thumb, it includes all essential networking features, including a 10Base- T/100Base-TX Ethernet connection, proven operating system, an embedded web server, a full TCP/IP protocol stack, and 256-bit AES encryption for secure communications. This easy-to-embed networking processor module enables engineers to focus on their core competency while reducing development time and cost and increasing product value.

Integrated Network Communications Module

Neport is powered by our network processor SoC(Nechip), which includes a 10/100 MAC/PHY and 256 KB of SRAM. It features a built-in web server for communications with a device via a standard Internet browser. Web capability can be used for remote configuration, real-time monitoring or troubleshooting. Neport has 512 KB of onmodule Flash for web pages and software upgrades. It acts as a dedicated co-processor that optimizes network activities permitting the host microprocessor to function at maximum efficiency.

Building Intelligent Devices

With Neport you can embed intelligence into any electronic product for applications such as:

  • Remote diagnostics and upgrades
  • Asset tracking and replenishment
  • Automation and control
  • Power management
  • Remote collaboration
  • Personalized content delivery

Robust, Feature-Rich Software Suite

Eliminating the need to negotiate the intricacies of Transmission Control Protocol (TCP) or Internet Protocol (IP), Neport incorporates:

  • Robust Real Time Operating System (RTOS)
  • Full-featured network protocol stack
  • Proven, ready-to-use serial-to-wireless application
  • Built-in web server for device communication and configuration via a standard browser

The Windows-based DeviceInstaller™ makes configuring one or more Neports in a subnet quick and easy.

  • Install and configure Neport and load firmware
  • Assign IP & other network specific addresses
  • Set wireless parameters
  • Load custom web pages and view specific device data
  • Enable web-based configuration of the device
  • Ping or query the attached device(s) over the network
  • Allow Telnet communication with the device(s)

Features / Specifications

Architecture
Processor Enhanced 32bits RISC ARM 
Memory 256 - 384KB SRAM and 512KB flash
Boot Rom:32K
Serial Interface
Interface One/Dual/Triple serial ports:
CMOS (Asynchronous, 5V Tolerant)
Data Rates 110 bps to 921,600 bps
Characters 7 or 8 data bits
Parity odd, even, none
Stop Bits 1 or 2
Control Signals CTS, RTS 
Flow Control XON/XOFF, RTS/CTS
Programmable I/O 3 PIO pins (software selectable)
Network Interface
Interface Ethernet 10Base-T or 100Base-TX (Auto-Sensing)
Connector RJ45
Protocols TCP/IP, UDP/IP, ARP, ICMP,PING, SNTP, TFTP,  DHCP,BOOTP,AutoIP,SMTP,DNS,
PPP/PPPoE,TELNET,and HTTP

SNMP,FTP Client/Server (Optional)
SSL/TLS,HTTPS(Optional)

Indicators (LED)
  • 10Base-T connection
  • 100Base-TX connection
  • Link & activity indicator - Full/half duplex
Management
  • Telnet, serial, internal web server, and Microsoft Windows®-based utility for device management
Security
  • Password protection
  • Optional 256-bit AES Rijndael encryption
Internal Web Server
Storage Capacity 256KB  - 1MB for web pages
Firmware Upgradeable via TFTP or serially
Power
Input Voltage 3.3 VDC
Environmental
Extended Temp -40¡ã to 85¡ãC (-40¡ã to 185¡ãF)
Commercial /Industrial Temp Commercial mode:
0¡ã to 70¡ãC (32¡ã to 158¡ãF) 
Industrial mode:
-40¡ã to 85¡ãC(-40¡ã to 185¡ãF)
Storage -40¡ã to 85¡ãC (-40¡ã to 185¡ãF)
Packaging
Dimensions 33.9 x 16.25 x 13.5mm (1.33 x 0.64 x 0.53 in)
Weight 9.6 g (0.34 oz)
Included Software
  • Web manager, Windows®-based device management and Com Redirector.

¡¡

back to top
Related Docmentation
 NePort-EN Catalog
 Presentation
 Programmer's Manual
 
 Related Software
 Firmware
Conextop Technologies Co.,Ltd Copyright 2006,All rights reserved