Packaged in a 121-ball micro BGA form-factor (pin-compatible with iChip CO710AG)
Secure – iChipSec CO211AG supports SSL3/TLS1.0 and FTPS
Designed for high bandwidth applications – the host interface supports 230 kbits/second in Serial mode
Supports switchable dial-up, wireless and LAN connectivity
Locally updatable firmware – the IP stack and Internet configuration parameters are stored in updateable flash memory that can be updated over a local serial connection
Supports up to 10 simultaneous TCP or UDP sockets, two listen sockets, Web server, RAS server, SMTP and POP3 clients, MIME attachments, FTP and Telnet clients, and SerialNET™ mode for plug-and-play functionality
Power-efficient – the core operates at 1.8-volts, while I/Os operate at 3.3-volts; includes Sleep mode for reducing power consumption
Operates in the industrial temperature range
The iChip™ CO210AG Internet Controller™ family provides exceptionally cost-effective, full-featured TCP/IP Internet connectivity for 3.3-volt devices. Designed to meet the needs of high-bandwidth applications, it provides an ideal solution for Internet-enabling devices via 10/100BaseT LANs, 802.11b Wireless LANs, dial-up and cellular modems (AMPS, CDMA, CDMA2000, CDPD, GPRS, GSM, IDEN, and TDMA networks).
iChip CO210AG is a lower-cost, pin-compatible version of iChip CO710AG, Connect One’s third generation TCP/IP connectivity solution. It is based on locally updateable firmware and supports all upper layer protocols, TCP/UDP sockets, and SerialNET™ mode for serial-to-IP bridging.
For secure applications, choose iChipSec™ CO211AG, which supports SSL3/TLS1.0 for secure sockets and FTPS. Support for HTTPS and SMTPS is currently in development. For more information about iChipSec's support of SSL3, please read the Technology Brief.
Internet Protocols: · PPP, LCP, IPCP, PAP, CHAP, IP, UDP, TCP, PING, SMTP, POP3, MIME, HTTP, FTP, TELNET, NTP · Includes Web server / 32KB Web site · Includes WAP server for device management via a WAP browser
Hardware Description: · Form Factor: 121-ball 10 x 10 x 1.2 mm uBGA package with 0.8 mm ball pitch · Core CPU: 32-bit RISC ARM7TDMI · SRAM: 256KB · Flash: 512KB · External memory bus · Core Operating Range: 1.65V to 1.95V · I/O Operating Range: 3.0V to 3.6V · Core Power Consumption: 10 mA Operating mode, 2.4 mA Power Save mode · I/O Power Consumption: 50 mA Operating mode, 18 mA Power Save mode · Operating Humidity: 90% maximum (non-condensing) · Operating Temperature Range: -40° to 85°C (-40° to 185° F ) · Host Interface: RS-232 Serial
Performance Specifications: · Host Data Rate: up to 230,400 bps in Serial mode. · Serial Data Format (AT+i mode): Asynchronous character; binary; 8 data bits; no parity; 1 stop bit. · Serial Data Format (SerialNET mode): Asynchronous character; binary; 7 or 8 data bits; odd, even or no parity; 1 stop bit. Flow Control: hardware (DTR, RTS, CTS, DCD) and software flow control. · I/O Power Consumption: 50 mA Operating mode, 18 mA Power Save mode
Click here for II-EVB-310 photo Overview II-EVB-310 is the evaluation board for iChip CO210AG for dial-up and cellular modem and wired LAN applications. The PCB includes the 3.3v CO210AG/60BI-3 mounted on the CO210AG-CM-200 Carrier Module. The EVB includes a 33,600 bps SocketModem and an RJ-11 connector to dial out from the SocketModem to the PSTN. The EVB also includes a daughter board with an SMSC LAN91C111 10/100BaseT Ethernet Controller and RJ-45 connector to connect to the LAN. The EVB accepts stackable daughter boards for Crystal CS8900A 10BaseT Ethernet controller or for the ASIX AX88796AL 10/100BaseT Ethernet controller. The EVB includes an RS-232 female DB-9 connector and RS-485 female DB-15 connector to connect to the host device; RS-232 male DB-9 connector to connect to an external modem; telephone, Cat. 5 Ethernet and serial cables; and power supply. Includes one iChip CO210AG/66BI-3 for prototyping. Please specify 110 or 220v.
